Preview

Российский технологический журнал

Расширенный поиск

КОМПОЗИЦИОННЫЕ ПОЛИМЕРНЫЕ СУСПЕНЗИИ СО СЛОЖНОЙ МОРФОЛОГИЕЙ ЧАСТИЦ

https://doi.org/10.32362/2500-316X-2017-5-3-74-105

Полный текст:

Аннотация

В настоящем обзоре приведена классификация полимерных частиц различного состава со сложной морфологией. Рассмотрены методы из изучения. Обобщены и проанализированы методы гетерофазной полимеризации, использующиеся для синтеза композиционных полимерных частиц с различной морфологией. Выявлены факторы, оказывающие влияние на свойства полимерных частиц.

Об авторах

Н. И. Прокопов
Московский технологический университет (Институт тонких химических технологий)
Россия


И. А. Грицкова
Московский технологический университет (Институт тонких химических технологий)
Россия


А. Ю. Гервальд
Московский технологический университет (Институт тонких химических технологий)
Россия


М. С. Балашов
Московский технологический университет (Институт тонких химических технологий)
Россия


Список литературы

1. Van Herk A.M. Chemistry and technology of emulsion polymerization, 2nd Edition. New Jersey, Hoboken: Wiley, 2013. 376 p.

2. Harkins W.D. A general theory of the mechanism of emulsion polymerization // J. Amer. Chem. Soc. 1947. V. 69. № 6. P. 1428-1444. DOI: 10.1021/ja01198a053

3. Smith W., Ewart R. Kinetics of emulsion polymerization // J. Chem. Phys. 1948. V. 16. № 6. P. 592-599.

4. Higuchi T. [et al.] Suprapolymer structures from nanostructured polymer particles // Angew. Chem. Int. Ed. 2009. V. 48. № 28. P. 5125-5128.

5. Srivastava S. [et al.] 25th Anniversary Article: Polymer-particle composites: Phase stability and applications in electrochemical energy storage // Adv. Mater. 2014. V. 26. № 2. P. 201-234.

6. Thakur M., Thakur V. Handbook of polymers for pharmaceutical technologies. Vol. 4. Bioactive and compatible synthetic/hybrid polymers. New Jersey, Hoboken: Wiley, 2016. 434 p.

7. Mittal V. Polymer nanocomposites by emulsion and suspension polymerization. Cambridge: RSC Publ., 2010. 332 p.

8. Such C., Rizzardo E., Serelis A., Hawkett B., Gilbert R., Ferguson C., Hughes R. Aqueous dispersions of polymer particles : пат. США 10/498502; заявл. 20.12.2002; опубл. 29.06.2010, Бюл. № 12. 29 с.

9. Chern C.S. Emulsion polymerization mechanisms and kinetics // Prog. Polym. Sci. 2006. V. 31. № 5. P. 443-457.

10. Stubbs J.M. [et al.] Polymer phase separation in composite latex particles. 1. Considerations for the nucleation and growth mechanism // Comptes Rendus Chimie. 2003. V. 6. № 11. P. 1217-1232.

11. Bannwarth M. [et al.] Colloidal polymers with controlled sequence and branching constructed from magnetic field assembled nanoparticles // ACS Nano. 2015. V. 9. № 3. P. 2720-2728.

12. Грицкова И.А. Эмульсионная полимеризация малорастворимых в воде мономеров : дис. … д-ра хим. наук. М.: МИТХТ им. М.В. Ломоносова, 1979.

13. Vogel N. [et al.] Advances in colloidal assembly: The design of structure and hierarchy in two and three dimensions // Chem. Rev. 2015. V. 115. № 13. P. 6265-6311.

14. Medvedev S.S., Gritskova I.A., Zuikov A.V., Sedakova L.I., Berejnoi G.D. The emulsion polymerization of styrene in the presence of nonionic emulsifiers // J. Macromol. Sci. Chem. 1973. V. A 7. № 3. P. 715-736.

15. Sperling L.H., Sarge H.D. Joined and sequential interpenetrating polymer networks based on poly(dimethylsiloxane) // J. Appl. Polym. Sci. 1972. V. 16. № 11. P. 3041-3046.

16. Hiemenz P., Lodge T. Polymer Chemistry, 2nd Edition. Boca-Raton: CRC Press, 2007. 608 p.

17. Friis N., Hamielec A.E. Kinetics of styrene emulsion polymerization // J. Polym. Sci. Part A: Polym. Chem. 1973 V. 11. № 12. P. 3321-3325.

18. Napper D.H. Particle morphology in emulsion polymerization // J. Polym. Sci. Part A: Polym. Chem. 1971. V. 9. № 7. P. 2089-2091.

19. Vanderhoff J.W. Core-shell morfology in emulsion polymerization. New Orlean: Third Annual Water Borne Symposium, 1976.

20. Plessis C. [et al.] Seeded semibatch emulsion polymerization of n-butyl acrylate. Kinetics and structural properties // Macromolecules. 2000. V. 33. № 14. P. 5041-5047.

21. Linne M.A. [et al.] On the structure and conformation of polymer chains in latex particles. I. Small-angle neutron scattering characterization of polystyrene latexes of small diameter // J. Macromol. Sci. Part B. 1988. V. 27. № 2-3. P. 181-216.

22. Yang S.I., Klein A., Sperling L.H. Development of supermolecular structure in polystyrene latexes // J. Polym. Sci. Part B: Polym. Phys. 1989. V. 27. № 8. P. 1649-1662.

23. Fisher L.W. [et al.] Neutron scattering from interfacially polymerized core-shell latexes // J. Colloid and Interface Sci. 1988. V. 123. № 1. P. 24-35.

24. Chern C.S., Poehlein G.W. Polymerization in nonuniform latex particles: Distribution of free radicals // J. Polym. Sci. Part A: Polym. Chem. 1987. V. 25. № 2. P. 617-635.

25. Yilmaz F. Polymer Science. Rijeka: InTech, 2013. 246 p.

26. Gonzalez-Ortiz L.J., Asua J.M. Development of particle morphology in emulsion polymerization. 1. Cluster dynamics // Macromolecules. 1995. V. 28. № 9. P. 3135-3145.

27. Gonzalez-Ortiz L.J., Asua J.M. Development of particle morphology in emulsion polymerization. 2. Cluster dynamics in reacting systems // Macromolecules. 1996. V. 29. № 1. P. 383-389.

28. Durant Y.G., Sundberg D.C. Latex particle morphology, fundamental aspects: A review // Polym. React. Eng. 2003. V. 11. № 3. P. 379-432.

29. Stubbs J.M., Sundberg D.C. A round robin study for the characterization of latex particle morphology - multiple analytical techniques to probe specific structural features // Polymer. 2005. V. 46. № 4. P. 1125-1138.

30. Stubbs J.M., Durant Y.G., Sundberg D.C. Polymer phase separation in composite latex particles. 1. Considerations for the nucleation and growth mechanism // Comptes Rendus Chimie. 2003. V. 6. № 11-12. P. 1217-1232.

31. Stubbs J.M., Sundberg D.C. The dynamics of morphology development in multiphase latex particles // Prog. Org. Coat. 2008. V. 61. № 2-4. P. 156-165.

32. Stubbs J.M., Carrier R., Sundberg D.C. Monte Carlo simulation of emulsion polymerization kinetics and the evolution of latex particle morphology and polymer chain architecture // Macromol. Theor. Simul. 2008. V. 17. № 4-5. P. 147-162.

33. Michler G.H. Electron microscopy of polymers (Springer Laboratory). Berlin: Springer, 2008. 473 p.

34. Kato K. Die elektronenmikroskopischen Darstellungen von ABS-Kunststoffen // Colloid Polym. Sci. 1967. V. 220. № 1. P. 24-31.

35. Okubo M. [et al.] Control of the morphology in particles produced by seed-emulsion polymerization // Kobunshi Ronbunshu. 1979. V. 36. № 7. P. 459-464.

36. Okubo M. [et al.] New seed emulsion polymerization and distribution of polymers in product particles // Kobunshi Ronbunshu. 1974. V. 31. № 9. P. 576-586

37. Kanig G., Neff H. Ein neues Kontrastierverfahren für die elektronenmikroskopische Untersuchung von säure- und estergruppenhaltigen Polymersystemen // Colloid Polym. Sci. 1975. V. 253. № 1. P. 29-31.

38. Maron S.H., Elder M.E., Ulevitch I.N. Determination of surface area and particle size of synthetic latex by adsorption I. Latices containing fatty acid soaps // J. Colloid Sci. 1954. V. 9. №2. P. 89-103.

39. Birdi K.S. Handbook of surface and colloid chemistry. Boca-Raton: CRC Press, 2008. 756 p.

40. Okubo M., Yamada A., Matsumoto T. Estimation of morphology of composite polymer emulsion particles by the soap titration method // J. Polym. Sci.: Polym. Chem. Ed. 1980. V. 18. № 11. P. 3219-3228.

41. Sawyer L.C., Grubb D.T., Meyers G.F. Polymer microscopy: Characterization and evaluation of materials. Berlin: Springer, 2008. 540 p.

42. Longo A. [et al.] Energy-dispersive small-angle x-ray scattering for investigating polymer morphology: Static and time-resolved experiments // Appl. Phys. Lett. 2004. V. 85. № 20. P. 4798-4800.

43. Dean K.M., Cook W.D., Lin M.Y. Small angle neutron scattering and dynamic mechanical thermal analysis of dimethacrylate/epoxy IPNs // Eur. Polym. J. 2006. V. 42. № 10. P. 2872-2887.

44. Nicolais L., Borzacchiello A., Lee S. Wiley Encyclopedia of Composites, 5 Volume Set, 2nd Edition. New Jersey, Hoboken: Wiley, 2012. 3344 p.

45. Okubo M. [et al.] // J. Polym. Sci. Part C: Polym. Lett. 1981. V. 19. № 3. P. 143-147.

46. Butt H.J., Cappella B., Kappl. M. Force measurements with the atomic force microscope: Technique, interpretation and applications // Surface Sci. Rep. 2005. V. 59. № 1-6. P. 1-152.

47. Okubo M., Seike M., Matsumoto T. Studies on suspension and emulsion. LX. Composite polymer emulsion film with temperature-sensitive properties // J. Appl. Polym. Sci. 1983. V. 28. № 1. P. 383-390.

48. Kantz M. Chemical analysis and characterization of polymer composite materials. Wiley-Blackwell, 2012. 3342 p.

49. Thakur V., Thakur M., Pappu A. Hybrid polymer composite materials, 1st Edition. Cambridge: Woodhead Publishing, 2017. 430 p.

50. Kim Ch., Randow Ch., Sano T. Hybrid and hierarchical composite materials. Berlin: Springer, 2015. 356 p.

51. Torza S., Mason S. J. Three-phase interactions in shear and electrical fields // J. Colloid and Interface Sci. 1970. V. 33. № 1. P. 67-83.

52. Chen Y.C., Dimonie V.L., Shaffer O.L., El-Aasser M.S. Development of morphology in latex particles: The interplay between thermodynamic and kinetic parameters // Polymer Int. 1993. V. 30. № 2. P. 185-194.

53. Durant Y.G., Sundberg D.C. Progress in predicting latex-particle morphology and projections for the future // ACS Symp. Ser. 1997. V. 663. P. 44-56.

54. Sundberg D.С., Casassa A.P., Pantazopoulos J., Muscato M.R. Morphology development of polymeric microparticles in aqueous dispersions. I. Thermodynamic considerations // J. Appl. Polym. Sci. 1990. V. 41. № 7-8. P. 1425-1442.

55. Kim J.W., Suh K.D. Monodisperse polymer particles synthesized by seeded polymerization techniques // Journal of Industrial and Engineering Chemistry. 2008. V. 14. № 1. P. 1-9.

56. Jonsson J-E.L., Hassander H., Jansson L.H., Tornel B. Morphology of two-phase polystyrene/poly(methyl methacrylate) latex particles prepared under different polymerization conditions // Macromolecules. 1991. V. 24. № 1. P. 126-131.

57. Wang T. [et al.] Poly(methyl methacrylate)/polystyrene composite latex particles with a novel core/shell morphology // J. Mater. Sci. 2010. V. 45. № 12. P. 3392-3395.

58. Chen Y.C., Dimonie V.L., El-Aasser M.S. Interfacial phenomena controlling particle morphology of composite latexes // J. Appl. Polym. Sci. 1991. V. 42. № 4. P. 1049-1063.

59. Chen S.A., Lee S.T., Lee S.J. Shell growth mechanism in emulsifier-free emulsion polymerization: Morphological and kinetic studies // Polymer Int. 1993. V. 30. № 4. P. 461-468.

60. Okubo A. Adsorption of trypsin onto poly(2-hydroxyethyl methacrylate)/polystyrene composite microspheres and its enzymatic activity // J. Appl. Polym. Sci. 1987. V. 34. № 4. P. 1439-1446.

61. Yang S.F., Xiong P.T., Gong T., Lu D.P., Guan R. St-BA copolymer emulsions prepared by using novel cationic maleic dialkyl polymerizable emulsifier // Eur. Polym. J. 2005. V. 41. № 12. P. 2973-2979.

62. Pichot C. Surface-functionalized latexes for biotechnological applications // Cur. Opin. Colloids Interface Sci. 2004. V. 9. № 3. P. 213-221.

63. Ferguson C.J., Russell G.T., Gilbert R.G. Synthesis of latices with hydrophobic cores and poly(vinyl acetate) shells. 2. Use of poly(vinyl acetate) seeds // Polymer. 2003. V. 44. № 9. P. 2607-2619.

64. Zhao K., Sun P., Liu D., Dai G. The formation mechanism of poly(vinyl acetate)/poly(butyl acrylate) core/shell latex in two-stage seeded semi-continuous starved emulsion polymerization process // Eur. Polym. J. 2004. V. 40. № 1. P. 89-96.

65. Kirsch S., Landfester K., Shaffer O., El-Aasser65. Kirsch S., Landfester K., Shaffer O., El-Aasser M.S. Particle morphology of carboxylated poly-(n-butyl acrylate)/poly(methyl methacrylate) composite latex particles investigated by TEM and NMR // Acta Polymerica. 1999. V. 50. № 10. P. 347-362.

66. Sundberg D.C., Durant Y.G. Latex particle morphology, fundamental aspects: A review // Polym. React. Eng. 2003. V. 11. № 3. P. 379-432.

67. Matyjaszewski K., Pyun J. Preparation of nanocomposite structures by controlled polymerization : патент США 09/972046; заявл. 05.10.2001; опубл. 30.09.2003, Бюл. № 12. 36 с.

68. Lee D.Y., Ishikava T. The formation of “inverted” core-shell latexes // J. Polym. Sci.: Polym. Chem. Ed. 1983. V. 21. № 1. P. 147-154.

69. Choi I.W., Lee K.W. Morphology of latex particles formed by poly(methyl methacrylate)-seeded emulsion polymerization of styrene // J. Polym. Sci. 1985. V. 30. № 5. P. 1903-1926.

70. Laurent A. Microspheres and nonspherical particles for embolization // Techniques in Vascular and Interventional Radiology. 2007. V. 10. № 4. P. 248-256.

71. Matsumoto T., Okubo M., Shibao S. // Kobunshi Ronbunshu. 1976. V. 33. № 10. P. 575-583

72. Okubo M., Katsuto Y., Matsumoto T. Rupture of anomalous composite particles prepared by seeded emulsion polymerization in aging period // J. Polym. Sci.: Polym. Lett. Ed. 1980. V. 18. № 7. P. 481-486.

73. Okubo M., Ando M., Yamada A., Katsuada Y., Matsumoto T. Studies on suspension and emulsion. XLVII. Anomalous composite polymer emulsion particles with voids produced by seeded emulsion polymerization // J. Polym. Sci.: Polym. Lett. Ed. 1981. V. 19. № 3. P. 143-147.

74. Okubo M., Katsuada Y., Matsumoto T. Studies on suspension and emulsion. LI. Peculiar morphology of composite polymer particles produced by seeded emulsion polymerization // J. Polym. Sci. Part C: Polym. Lett. 1982. V. 20. № 1. P. 45-51.

75. Min T.J., Klein A., El-Aasser M.S., Vanderhoff J.W. Morphology and grafting in polybutylacrylate-polystyrene core-shell emulsion polymerization // J. Polym. Sci. Part A: Polym. Chem. 1983. V. 21. № 10. P. 2845-2861.

76. Okubo M., Katsuada Y., Yamada A., Matsumoto T. Studies on suspension and emulsion. XXXIX. Control of the morphology in particles produced by seed-emulsion polymerization // Kobunshi Ronbunshu. 1979. V. 36. № 7. P. 459-464.

77. Ikada Y., Horii F., Sakurada I. Emulsifying effect of graft copolymer for the homopolymer // J. Polym. Sci. Part A: Polym. Chem. 1973. V. 11. № 3. P. 27-40.

78. Wypych G. Handbook of polymers. Ontario: ChemTec Publishing, 2016. 712 p.

79. Dufal S. [et al.] Prediction of thermodynamic properties and phase behavior of fluids and mixtures with the SAFT-γ Mie group-contribution equation of state // J. Chem. & Eng. Data.2014. V. 59. № 10. P. 3272-3288.

80. Cavaille J.Y., Jourdan C., Kong X.Z., Perez J., Pichot C., Guillot J. Comparison of micromechanical properties of latex films obtained by different emulsion copolymerization pathways // Polymer. 1986. V. 27. № 5. P. 693-702.

81. Bamford C.H., Eastmond G.C., Whittle D. Network properties: (1) Multiple glass transitions // Polymer. 1971. V. 12. № 4. P. 247-257.

82. Sperling L.H., Chiu T.W., Hartman C.P., Thomas D.A. Latex Interpenetrating polymer networks // Int. J. Polym. Mater. & Polym. Biomater. 1972. V. 1. P. 331-341.

83. Sperling L.H. Interpenetrating polymer networks and related materials // J. Polym. Sci.: Macromol. Rev. 1977. V. 12. № 1. P. 141-180.

84. Sperling L.H., Chiu T.W., Thomas D.A. Glass transition behavior of latex interpenetrating polymer networks based on methacrylic/acrylic pairs // J. Appl. Polym. Sci. 1973. V. 17. № 8. P. 2443-2455.

85. Lorentz J.E., Thomas D.A., Sperling L.H. Viscoelastic properties of acrylic latex interpenetrating polymer networks as broad temperature span vibration damping materials // ACS Symp. Ser. 1976. V. 24. P. 306-329.

86. Anderson J.N., Baczek S.K., Adams H.E., Vescelius L.E. Functionality distribution of hydroxyl-terminated polybutadienes using gel permeation chromatography. I. The method and calibration procedure // J. Appl. Polym. Sci. 1975. V. 19. № 8. P. 2225-2277.

87. Thickett S.C., Gilbert R.G. Emulsion polymerization: State of the art in kinetics and mechanisms // Polymer. 2007. V. 48. № 24. P. 6965-6991.

88. Vale H.M., McKenna T.F. Modeling particle size distribution in emulsion polymerization reactors // Prog. Polym. Sci. 2005. V. 30. № 10. P. 1019-1048.

89. Dokucu M.T., Park M.J., Doyle F.J. Reduced-order methodologies for feedback control of particle size distribution in semi-batch emulsion copolymerization // Chem. Eng. Sci. 2008. V. 63. № 5. P. 1230-1245.

90. Misra S.C., Pichot C., El-Aasser M.S., Vanderhoff, J.W. Effect of emulsion polymerization process on the morphology of vinyl acetate-butyl acrylate copolymer latex films // J. Polym. Sci.: Polym. Lett. Ed. 1979. V. 17 № 7. P. 567-572.

91. Kang K., Kan C., Du Y., Liu D. Synthesis and properties of soap-free poly(methylmethacrylate-ethyl acrylate-methacrylic acid) latex particles prepared by seeded emulsion polymerization // Eur. Polym. J. 2005. V. 41. № 3. P. 439-445.

92. Chern C.S., Hsu H. Semibatch emulsion copolymerization of methyl methacrylate and butyl acrylate // J. Appl. Polym. Sci. 1995. V. 55. № 5. P. 571-581.

93. Guiot A., Guillot J., Pichot C., Rios L. New design for producing constant-composition copolymers in emulsion polymerization // ACS Symp. Ser. 1981. V. 165. P. 415-436.

94. Pichot C. Recent developments in the functionalization of latex particles // Macromol. Chem. Phys. Macromol. Symposia. 1990. V. 35/36. P. 327-347.

95. Kim J.H, Chainey M., El-Aasser M.S., Vanderhoff J.W. Preparation of highly sulfonated polystyrene model colloids // J. Polym. Sci. Part A: Polym. Chem. 1989. V. 27. № 10. P. 3187-3199.


Для цитирования:


Прокопов Н.И., Грицкова И.А., Гервальд А.Ю., Балашов М.С. КОМПОЗИЦИОННЫЕ ПОЛИМЕРНЫЕ СУСПЕНЗИИ СО СЛОЖНОЙ МОРФОЛОГИЕЙ ЧАСТИЦ. Российский технологический журнал. 2017;5(3):74-105. https://doi.org/10.32362/2500-316X-2017-5-3-74-105

For citation:


Prokopov N.I., Gritskova I.A., Gervald A.Yu., Balashov M.S. COMPOSITE POLYMER SUSPENSIONS WITH COMPLEX PARTICLE MORPHOLOGY. Russian Technological Journal. 2017;5(3):74-105. (In Russ.) https://doi.org/10.32362/2500-316X-2017-5-3-74-105

Просмотров: 111


Creative Commons License
Контент доступен под лицензией Creative Commons Attribution 4.0 License.


ISSN 2500-316X (Online)